| Quantity: | |
|---|---|
TY-8903
High-temperature antioxidant TY-8903 is suitable for polyamide, nylon and their blends (such as blending with elastic fibers) to reduce the yellowing of all-white fabrics and stabilize light-colored fabrics during heat treatment processing;
1. Polyamide and its blend (such as blending with elastic fiber) reduce the yellowing of all-white fabrics and stabilize light-colored fabrics during heat treatment processing;
2. Ensure that the processing is right, with a stable whitening effect and reducing color change, with a brightening effect.
3. Avoid yellowing of polyamide fibers when exposed to heat treatment (press molding test) or air heat treatment (front or back)
4. Improve the whiteness of all-white fabrics and the brightness of light-colored fabrics
5. Soluble with most softeners and their finishing aids
6. Small dosage, high efficiency, easy to use, no color change, excellent reproducibility
Appearance: white powder
Ionicity: non-ionic
Composition: Antioxidant complex
Solubility: Easy to dissolve in water
Compatibility: Compatible with most non-ionic anionic aids, and can be used simultaneously with other finishing agents, but compatibility tests should be done in advance.
Operation: It is only recommended to use dip rolling method for processing.
Application
Use the process:
1. Pre-order type
Dip rolling 2-5 g/l antioxidant
PH. 5.0-6.0 (adjusted with acetic acid or citric acid)
2. Post-standardization
Dip rolling 2-8 g/l antioxidant
PH 5.0-6.0 (regulated with acetic acid or citric acid, preferably with citric acid)
Antioxidants can also be used with other finishing aids, but compatibility tests should be done in advance.
It is recommended to store at a storage temperature of 5-30℃, and it should be stored in a cool and ventilated warehouse.
The technical opinions provided in this material are for reference only. The data or results are based on controlled small samples or large sample experiments. The buyer must confirm whether it is suitable for its process, purpose and purpose according to the expected conditions of use through the experiment. Our company only guarantees whether the product meets the specifications. The only compensation for the user and the only responsibility of our company are limited to the replacement of the product.
